Community
Members options
Search
Back to top
Skip to content
Skip to menu
Canopy Construction On The Hilux
Posted by: Rusty_ on Monday, February 18, 2008 (05:47:53) (350 Reads)
Finished Canopy
Front frame layout
Side frame layout
Canopy frame welded and ready to fit to tray
Canopy fitted and completed
Center post showing brace to hold up the gate
Seek News › DIY › Canopy Construction On The Hilux
Back to top Back to main Skip to menuPosted by: Rusty_ on Monday, February 18, 2008 (05:47:53) (350 Reads)
Finished Canopy
| Material and /or Parts | |
|---|---|
Approx Time: | About 3 weeks when time permitted |
In this article I'll be describing with photos how I went about constructing the canopy on our ute.
I have include a couple of snap shots taken out of Autocad14, you can use them as a schematic to write down your measurements. If you have Autocad and would like a copy of the files, please do not hesitate to ask for a copy.
The reason I have left the measurements off is that every tray will have different dimensions and so not to confuse the issue it's better this way.
(To be continued)...
I have include a couple of snap shots taken out of Autocad14, you can use them as a schematic to write down your measurements. If you have Autocad and would like a copy of the files, please do not hesitate to ask for a copy.
The reason I have left the measurements off is that every tray will have different dimensions and so not to confuse the issue it's better this way.
(To be continued)...
Front frame layout
Side frame layout
Canopy frame welded and ready to fit to tray
Canopy fitted and completed
Center post showing brace to hold up the gate
